Return to Bopm.txt CVS log

Up to [local] / ircnowd / doc

Annotation of ircnowd/doc/Bopm.txt, Revision 1.1.1.1

1.1       tomglok     1:
                      2:                      ngIRCd - Next Generation IRC Server
                      3:                            http://ngircd.barton.de/
                      4:
                      5:                (c)2001-2014 Alexander Barton and Contributors.
                      6:                ngIRCd is free software and published under the
                      7:                    terms of the GNU General Public License.
                      8:
                      9:                                 -- BOPM.txt --
                     10:
                     11:
                     12: I. Introduction
                     13: ~~~~~~~~~~~~~~~~
                     14:
                     15: Citing <http://wiki.blitzed.org/BOPM>: "BOPM is an open source open proxy
                     16: monitor, designed for use with hybrid-based ircds, although it can be used
                     17: with slight modification on any server which has the ability to show connects
                     18: to opers and that supports KLINEs."
                     19:
                     20: Starting with Release 17, ngIRCd supports all required log messages that
                     21: BOPM requires to be useful.
                     22:
                     23: II. Installation
                     24: ~~~~~~~~~~~~~~~~~
                     25:
                     26: Install BOPM as usual, please see the BOPM documentation for details.
                     27: Afterwards adjust the following configuration parameters that are important
                     28: for ngIRCd:
                     29:
                     30: a) BOPM "IRC" section:
                     31:
                     32:   1) Set "server" and "port" accordingly,
                     33:
                     34:   2) adjust the "oper" line to match an [Operator] block in ngircd.conf,
                     35:
                     36:   3) change "mode" to "+ci" or "+c".
                     37:
                     38:   4) Set "connregex" to the following string, everything in one line(!):
                     39:      "Client connecting: ([^ ]+) \\(([^@]+)@([^\\)]+)\\) \\[([0-9\\.]+)\\].*";
                     40:      and comment out all the other "connregex" examples (that is, prepend a
                     41:      "#" character).
                     42:
                     43:   5) Set "kline" to "GLINE *@%h :Open proxy found on your host!";
                     44:      and comment out all the other "kline" examples.
                     45:
                     46: b) BOPM "scanner" section:
                     47:
                     48:   Make sure you configure a valid "target_ip" and "target_port" for the
                     49:   configured scanners to test. And please note that you CAN'T USE the port
                     50:   of ngIRCd, because ngIRCd doesn't send any banner message by default!
                     51:
                     52:   So you need a service what sends a banner, so for example POP3, SMTP,
                     53:   IMAP, or SSH daemons should work ...